求关于打火机的英文定单?
kuaidi.ping-jia.net 作者：佚名 更新日期：2024-08-02
“打火机”英文是什么？
[SALES CONTRACT NAME] [销售合同名称]
- by and between - 由
[BUYER NAME] （买方名称）
BUYER 买方
- and - - 与 -
[SELLER NAME] （卖方名称）
SELLER 卖方
签订
TABLE OF CONTENTS 目录
PRELIMINARY STATEMENT 1
1. DEFINITIONS AND INTERPRETATION 1 1. 定义和解释 1
2. SCOPE OF CONTRACT 1 2. 合同范围 1
3. CONTRACT PRICE 2 3. 合同总价 1
4. PAYMENT 2 4. 支付 2
5. DELIVERY 4 5. 交货 3
6. PACKING AND SHIPPING MARKS 5 6. 包装和唛头 4
7. INSPECTION AND CLAIM 6 7. 检验和索赔 5
8. INSTALLATION, COMMISSIONING AND ACCEPTANCE OF THE EQUIPMENT 7 8. 设备安装、调试和验收 6
9. WARRANTY 9 9. 保证 7
10. SOFTWARE LICENSE 10 10. 软件许可 8
11. INTELLECTUAL PROPERTY INDEMNITY 12 11. 知识产权赔偿 9
12. TAXES 13 12. 税收 10
13. REPRESENTATIONS AND WARRANTIES 13 13. 陈述及保证 10
14. TERM 14 14. 合同期限 11
15. TERMINATION 14 15. 合同终止 11
16. CONFIDENTIALITY 15 16. 保密义务 12
17. BREACH OF CONTRACT 16 17. 违约 12
18. FORCE MAJEURE 16 18. 不可抗力 13
19. SETTLEMENT OF DISPUTES 17 19. 争议的解决 13
20. MISCELLANEOUS PROVISIONS 20 20. 其他规定 16
SCHEDULE A – DEFINITIONS AND INTERPRETATION 25 附录一 - 定义和解释 19
SCHEDULE B - SPECIAL TERMS 29 附录二 - 特别条款 22
ANNEX 1 - EQUIPMENT, SERVICES & DOCUMENTATION LIST AND PRICES 31 附件一 合同设备、合同服务及相关文件清单与价格 24
ANNEX 2 - SPECIFICATIONS 32 附件二 合同技术规范 25
ANNEX 3 - PROJECT SCHEDULE 33 附件三 项目进度表 26
ANNEX 4 - ENGINEERING NOTES AND INSTALLATION RESPONSIBILITIES 34 附件四 工程说明及安装责任范围 27
ANNEX 5 - EQUIPMENT ACCEPTANCE TEST PLAN 35 附件五 设备验收测试方案 28
ANNEX 6 - SPECIMEN OF ACCEPTANCE CERTIFICATE 36 附件六 验收合格证书样本 29
CAVEATS AND DRAFTING NOTES 37 注意事项与说明 30
THIS CONTRACT ("Contract") is made in [the Contract Location] and, China on the Contract Date set out in Schedule B (Special Terms) by and between the Buyer and Seller specified in Schedule B (Special Terms). Buyer and Seller shall hereinafter be referred to individually as a "Party" and collectively as the "Parties". 本合同（“本合同”）于附录二（特别条款）中所列的合同生效日由附录二（特别条款）中所列的买方和卖方在中国[缔约地点]签订。买方和卖方以下单独称为“一方”，合称为“双方”。
PRELIMINARY STATEMENT 前言
After friendly consultations conducted in accordance with the principles of equality and mutual benefit, the Parties have agreed to enter into a sales contract in accordance with Applicable Laws and the provisions of this Contract. 双方本着平等互利的原则，经友好协商，依照有关法律，同意按照本合同的条款，订立销售合同。
Now the Parties Hereby Agree as Follows: 双方现协议如下：
1. DEFINITIONS AND INTERPRETATION 1. 定义和解释
Unless the terms or context of this Contract otherwise provide, this Contract shall be interpreted in accordance with Schedule A, and each of the terms used herein shall have the meaning ascribed to it in Schedule A (Definitions and Interpretation) or Schedule B (Special Terms) as the case may be. 除本合同条款或上下文另有所指，本合同应根据附录一进行解释，本合同中所有相关用语的定义见附录一（定义和解释）和附录二（特别条款），以适用者为准。
2. SCOPE OF CONTRACT 2. 合同范围
2.1 Supply of Equipment and Services 2.1 供应合同设备及提供合同服务
Seller shall supply to Buyer the Equipment and Services (as more specifically set out in Annex 1 hereto) [for the Project] in accordance with the terms of this Contract. Buyer shall pay Seller the Contract Price set out in Schedule B (Special Terms) hereto and shall perform its other responsibilities in accordance with the terms of this Contract. 卖方须按照本合同的条款，[就合同项目]向买方供应合同设备和提供合同服务（详见本合同附件一）。买方须按照本合同的条款，向卖方支付附录二（特别条款）所列的合同总价，同时履行本合同中规定的其它义务。
2.2 Project Supervisors 2.2 项目负责人
Seller and Buyer shall each nominate a representative as its project supervisor for the Project (each, a “Project Supervisor” and jointly, the “Project Supervisors”). Each Project Supervisor shall be authorized to deal with all technical matters in connection with the Equipment and the Services during the period from the Effective Date up to the expiration of the applicable Warranty Periods. Detailed arrangements for both regularly scheduled and emergency communications between the Project Supervisors shall be made through friendly consultation by Seller and Buyer. The Project Supervisors shall fully cooperate to resolve all technical issues which may arise in respect of the Equipment and the Services. If there is any dispute between the Project Supervisors, they shall analyze the problem, clarify the responsibilities and, to the fullest extent possible, settle it at the Installation Sites through friendly consultation. During the period of Installation and Commissioning, the progress of work, the main work done every week, all problems arising and the suggested solution(s) shall be reported weekly by the Project Supervisors to Seller and Buyer. 卖方及买方应分别指派一位代表作为合同项目的项目负责人(“项目负责人”)，并授权各自的项目负责人于合同生效日期到相关保修期届满这一段时期内，处理合同设备及合同服务相关部份的所有技术事宜。卖方及买方应通过友好协商就项目负责人之间的定期联络以及在紧急情况下的联络作出具体安排。项目负责人应通力合作以解决合同设备和合同服务可能发生的所有技术问题。如果彼此之间发生争议，项目负责人应分析有关问题，分清责任，通过友好协商，尽最大可能在安装现场解决有关问题。在安装及调试期间，项目负责人每周应向卖方及买方报告工作进度、每周所完成的主要工作、所有出现的问题及建议的解决方案。
2.3 No Transfer of Equipment 2.3 禁止转让合同设备
Buyer acknowledges and agrees that the Equipment constitutes and embodies the Confidential Information and Intellectual Property of Seller. Without the prior written consent of Seller, Buyer may not directly or indirectly transfer the Equipment to any third party for consideration or without consideration. 买方确认并同意合同设备构成并载有卖方的保密资料及知识产权。未经卖方书面同意，买方不得直接或间接地、有偿或无偿地、将合同设备转让给第三方。
3. CONTRACT PRICE 3. 合同总价
3.1 Price 3.1 合同总价
The Contract Price is set out in Schedule B (Special Terms). 合同总价详见附录二(特别条款)。
3.2 Consideration for Price 3.2 合同总价包括的事项
This Contract Price covers: 合同总价包含：
(a) the Equipment (including Hardware and Software License) and Services, (a) 合同设备(包括设备硬件和软件使用权)和合同服务，
(b) if Seller is the Party Responsible for Shipment, the cost of shipment of the Hardware and Documentation to the Place of Delivery. (b) 如果卖方是负责运输方，运送设备硬件和相关文件到交货地点的费用。
3.3 Costs and Expenses 3.3 费用和开销
The Contract Price does not cover costs and expenses that are for Buyer’s account under this Contract, or any taxes (including but not limited to customs duty and value added tax) payable by Buyer in respect of this Contract. 合同总价不含根据本合同应由买方承担的费用和开销，或买方就本合同应支付的税款(包括但不限于关税及增值税)。
4. PAYMENT 4. 支付
Buyer shall pay Seller the Contract Price on the following terms: 买方应按以下条款向卖方支付合同总价。
4.1 Advance Payment 4.1 预付款
The Advance Payment shall be paid by Buyer to Seller by wire transfer to Seller’s Designated Bank Account within ten (10) days after Buyer has received the following documents provided by Seller: 合同设备预付款由买方在从卖方收到下述文件后十（10）日内，以电汇的方式将预付款汇至卖方指定的银行帐户：
(a) Pro forma invoice covering one hundred percent (100%) of the Contract Price in six copies; (a) 载明百分之百(100％)合同总价金额的形式发票，一式六（6）份；
(b) Commercial invoice covering the Advance Payment in six copies; and (b) 载明预付款金额的商业发票，一式六（6）份；
(c) Sight draft covering the Advance Payment in two copies. (c) 载明预付款金额的即期汇票，一式两（2）份。
4.2 Delivery Payment 4.2 交货付款
The Delivery Payment shall be paid by Buyer to Seller under an irrevocable letter of credit (“Letter of Credit”). 买方应向卖方开具一份不可撤销的信用证（“信用证”），金额为交货付款额。
Buyer shall fifteen (15) days prior to the scheduled Delivery Date for first Shipment, open the Letter of Credit in favor of Seller for the Delivery Payment with a bank and in form and content acceptable to both parties. The Letter of Credit shall be available against Seller's draft(s) at sight drawn on the opening bank for the Relevant Percentage of the invoice price of each Shipment accompanied by the shipping documents as follows: 买方应于第一批合同设备装运日期前至少十五（15）天，开具一份信用证（信用证），收款人为卖方，金额为交货付款额，信用证的形式、内容、以及开证银行事先应经双方一致同意。每批合同设备交货后，卖方可凭以下单据通过即期汇票（一式两份）向开证行议付每一批合同设备发票金额的相关百分比：
(a) One original and two copies of [Airway Bill] [or other document of title] to be marked “Freight [Collect] [Prepaid]”, indicating shipping mark and consigned to Buyer. (a) 以买方为收货人的[空运单][其他运输单据]，标明“运费〖到付〗〖已付〗”，并注明唛头，一(1)份原件，两(2)份复印件；
(b) Commercial Invoice covering the Relevant Percentage in three (3) originals and three (3) copies, indicating the Contract number, L/C number and shipping mark; (b) 金额为相关百分比的商业发票，注明合同号、信用证号及唛头；三(3)份原件，三(3)份复印件，
(c) Packing list in three (3) originals and three (3) copies issued by Seller; (c) 卖方出具的装箱单，三(3)份原件，三(3)份复印件；
(d) One (1) original and one (1) copy of a Certificate of Quality issued by Seller; (d) 卖方出具的质量合格证书，一(1)份原件，一(1)份复印件；
(e) One (1) copy of fax/email to Buyer advising particulars of delivery immediately after delivery to the carrier at the Port of Delivery has been made; (e) 在装运港将货物交给承运人后以传真或电子邮件的方式通知买方有关该批货物装运细节的一份通知复印件；
(f) One (1) original and one (1) copy of certificate of origin; (f) 该批货物原产地证书，一(1)份原件，一(1)份复印件；
(g) Two (2) copies of export licenses issued by the relevant export authority or two (2) copies of the confirmation from Seller that no export license is required. (g) 有关部门颁发的出口许可证的复印件或卖方签发的表明该批货物无需出口许可证的声明，一式两(2)份。
(h) If Seller is the Party Responsible for Shipment, one (1) copy of insurance certificate specifying the risk type as all risk covering one hundred and ten percent (110%) of the invoice amount for such Shipment. (h) 如果卖方为负责运输方，一(1)份该批货物的保险证明，载明险别为一切险，投保金额为该批货物发票金额的百分之一百一十(110%)。
The Letter of Credit shall be valid until the twenty-first (21st) day after the date of last scheduled Shipment. 信用证应在预定的最后一批货物的交货日后的二十一(21)日内保持有效。
4.3 Payment on Acceptance 4.3 验收合格之后的付款
The Acceptance Payment for the Equipment shall be paid by Buyer by T/T within fifteen (15) days after Buyer has received the following documents from Seller: 合同项目的验收合格之后的付款，由买方在收到卖方提交的下述文件之后十五（15）日内以电汇的方式支付：
(a) Commercial invoice covering the Acceptance Payment in three (3) originals and three (3) copies; (a) 载明验收合格之后付款金额的商业发票，三(3)份原件和三(3)份复印件；
(b) One (1) original and one (1) copy of the Acceptance Certificate in respect of the Project. (b) 合同项目的验收合格证书，一(1)份原件和一(1)份复印件。
4.4 Shipment by Seller 4.4 卖方运输
Seller shall commence Shipment once Buyer has paid the Advance Payment and opened the Letter of Credit as prescribed in Articles 4.1 and 4.2. 买方按照第4.1 条及第4.2 条的规定支付预付款并开出信用证后，卖方应开始发运合同设备。
4.5 Bank Charges 4.5 银行费用
Each party shall be responsible for its own bank charges. 各方应负责各自的银行费用。
4.6 Title to Hardware 4.6 硬件所有权
Full title to all Hardware shall transfer from Seller to Buyer upon Buyer’s payment in full of the Contract Price. 设备硬件部分的全部所有权于卖方全额收到合同总价之时，转移给买方。
4.7 Late Payments 4.7 付款延期
If Buyer fails to make any payment within the time stipulated in this Article 4, then Buyer shall be liable to pay to Seller interest on such unpaid amounts from the due date through the date such delayed payment is made in full. The applicable rate of interest shall be the LIBOR rate for six-month U.S. dollar loans plus 2%. 如果买方未能在第4 条规定的时间内支付某一笔款项，应就欠款向卖方支付利息，利息从到期应付之日至所欠款项全额还清之日计算。适用的利率为六个月期LIBOR 美元贷款的利率加2%。
5. DELIVERY 5. 交货
5.1 Delivery Schedule 5.1 交货进度表
Seller shall deliver each Shipment to the applicable Place of Delivery on or before the applicable Delivery Date set forth in the Project Schedule. The number of Shipments shall not exceed the Maximum No. of Shipments set forth in Schedule B (Special Terms). If the Place of Delivery is different from the Installation Site, then Buyer shall be responsible for transportation and insurance of each shipment from the Place of Delivery to Installation Site. 卖方应在项目进度表中规定的有关交货日或之前交每一批货。分批交货的总批数不得超过附录二(特别条款)中规定的合同设备最多发货批数。如交货地点不是设备安装地，买方应承担将每批货物从交货地点运送至设备安装地的运输和保险费用。
5.2 Notification before Shipment 5.2 装运前通知
At least two (2) weeks before making each Shipment, Seller shall send Buyer written notice of all relevant shipping details, including description, quantity and approximate weight and size of the Equipment in each Shipment, and other information consistent with industry practice. 在装运每一批合同设备至少两 (2)周前，卖方应书面向买方通知该批合同设备装运的所有相关细节，包括设备说明、数量、大概重量及体积、以及其他按照行业惯例应该提交的资料。
5.3 Equipment Delivery 5.3 合同设备交付
All the Equipment shall be shipped in complete sets, except as otherwise agreed, i.e., any special tools for installation, materials and easily worn-out parts shall be dispatched along with the relevant Equipment. 除非另有协议，所有的合同设备均应整套装运，即，所有专用安装工具、辅料及易耗备件应与相关的合同设备一起装运。
5.4 Notification After Shipment 5.4 装运后通知
Seller shall notify Buyer by fax or email of all shipping details within two (2) working days after each Shipment has been dispatched. For each large item, if any, over two (2) metric tons, the gross weight, measurement (L x W x H), name and price of such item shall be separately indicated. 卖方应在每批合同设备装运后的两(2)个工作日内，以传真或电子邮件的方式通知买方有关该批设备装运的细节。对超过2 公吨重的大件货物(如果有的话)要分别载明每一件货物的毛重、尺寸(长×宽×高)、名称及价格。
5.5 Customs Clearance Documents 5.5 货物清关文件
Within a reasonable time after each Shipment has been dispatched, Seller shall mail the Customs Clearance Documents specified in Schedule B (Special Terms). 卖方应在每批合同设备装运后的合理时间内，向买方寄出附录二(特别条款)中列出的货物清关文件。
5.6 Insurance 5.6 保险
The Party Responsible for Shipment shall be responsible for obtaining insurance during shipment for the Equipment and Documentation in accordance with industry practice at its sole cost. If damage to the Equipment occurs during shipment, Seller and Buyer shall work together to submit an insurance claim. 负责安排运输的一方应依照行业惯例，自费为在运输途中的合同设备及相关文件购买保险。如果在运输过程中合同设备受损，卖方和买方应相互协作提出保险索陪。
5.7 Seller's Late Delivery 5.7 买方交货迟延
If solely due to Seller’s fault, Seller fails to complete delivery of all Shipments to the Place of Delivery on or before the Delivery Date for the final Shipment set forth in the Project Schedule, then Seller shall be liable to pay to Buyer liquidated damages in respect of such delivery delay at the Late Delivery Penalty Rate until such delayed Equipment is delivered in accordance with the terms of this Contract or the end of the Maximum Late Delivery Period, whichever occurs earlier. The total liquidated damages for late delivery shall not exceed the Maximum Late Delivery Penalty. The payment of liquidated damages for late delivery of any Shipment shall not release Seller from its responsibility to complete delivery of such Shipment. 如果完全由于卖方的过错，卖方未能在项目进度表规定的最后一批设备的交货日当日或之前将所有合同设备交至交货地点，卖方有责任就交货延误的合同设备按交货延误违约金比率向买方支付交货延误违约金，直到卖方按照本合同的条款交付所延误的合同设备，或直到交货延误的最长期限届满(以两者中较短者为准)。交货延误违约金的总额不超过特别条款中规定的交货延误违约金最高限额。卖方因交货延误而支付交货延误违约金并不解除其交货义务。
5.8 Buyer's Termination Right 5.8 买方终止权
If such delivery delay extends beyond the expiration of the Maximum Late Delivery Period, then Buyer shall have the right to terminate this Contract. If Buyer terminates this Contract in part or in whole, it shall return at Seller's expense all cancelled Equipment received from Seller, and Seller shall thereafter refund to Buyer, within fifteen (15) days of the date of return of all such Equipment, all amounts paid by Buyer to Seller for the terminated Equipment. 如果交货延误时间超出了最多迟延交货天数，则买方有权终止本合同。如果买方部分或全部终止本合同，买方应将从卖方收到的合同终止部分所涉及的合同设备归还卖方，费用由卖方承担。随后卖方应在这些合同设备全部返还之日后的十五(15)日内，向买方退还其就合同终止部分所涉及的合同设备向卖方支付的全部货款。
5.9 Buyer's Claims 5.9 买方索赔
All of Buyer’s claims in respect of late delivery of Equipment shall be handled solely and exclusively in accordance with the provisions of Articles 5.7 and 5.8 above. 所有买方就交货延误提出的索赔应完全按照上述第5.7 和5.8 条的规定处理，且排除其他救济措施。
6. PACKING AND SHIPPING MARKS 6. 包装和唛头
6.1 Equipment Packing 6.1 合同设备包装
All of the Equipment to be delivered by Seller shall be packed in a manner suitable to protect it against repeated handlings and numerous loadings and unloadings. Protective measures consistent with the characteristics and requirements of the various items of Equipment shall be taken to prevent the Equipment from damage by moisture, rain, shock and corrosion. 卖方对所交付的一切合同设备都应以适当方式包装，使之不因多次操作和装卸而受损。应根据合同设备不同部件的特点和要求采取保护措施，以免因潮湿、雨水、震动和腐蚀而造成损害。
6.2 Labelling of Accessories 6.2 附件标签
Each of the accessories in a package or bundle shall be labelled by Seller to indicate contract number, package number, name of the Equipment to which it is an accessory, name of accessories and their position numbers on assembly drawings. Spare parts and tools shall be marked with the words “Parts” or “Tools” besides the above particulars. 卖方应给包装箱或捆束中的每个附件加上标签，注明合同号、包装箱号、附件所属的主体合同设备的名称、附件的名称及其在安装图上的位置号码。除上述各项外，备件和工具上还应标明“备件”或“工具”字样。
6.3 Specific Markings 6.3 具体标记
Seller shall mark the following on the four adjacent sides of each package of the goods with indelible paint in conspicuous printed English words: 卖方应在货物的每个包装箱的相邻四面用不褪色的颜料以显著的印刷体英文标明下列各项：
(1) Contract Number (1) 合同号:
(2) Shipping Mark (2) 唛头:
(3) Consignee (3) 收货人:
(4) Place of Destination (4) 目的地:
(5) Name of Equipment (5) 合同设备名称:
(6) Case Number (6) 箱号:
(7) Gross Weight (Kg) (7) 毛重(公斤):
(8) Measurement (L x W x H in cm) (8) 尺寸(长×宽×高，以厘米为单位):
(9) Sites Code Number（if applicable） (9) 场地编号（如适用）:
Should any goods weigh two (2) or more than two (2) metric tons, the center of gravity and hoisting position shall be marked in English and with the appropriate markings on two sides of each case so as to facilitate loading and handling. In addition, in accordance with the characteristics and different requirements of the goods for loading
举个例
Purchasing Order
PO#:1234
Buyer name:
Vendor name:
Item name: Lighter
Color: White
Order quantity: 10,000 piece
Delivery: 2009/07/01
Ship from: Xiamen
Ship to: Hongkong
Fob: RMB$2.00 not include VAT
Fob point: Xiamen
Total amount: RMB$20,000
Payment team: L/C
30% of total amount must be paid before starting to product. 70% of total amount must be paid before shipping
Packing information:
1 piece packed in one small box
box dimenssion: 30mm*15mm*8mm
求几篇实际工作中用到的外贸业务询盘,回盘或发盘的例子.最好中英文都...
答：二零零零年五月二十曰来函收到，不胜感激。得知贵公司认为火焰牌打火机价格过高，无利可图，本公司极感遗憾。来函又提及曰本同类货品报价较其低近百分之十。本公司认同来函的说法，然而，其他厂商的产品质量绝对不能与本公司的相提并论。虽然极望与贵公司交易，但该还盘较本公司报价相差极大，故未能...
打火机是什么英文单词
答：打火机的英语是lighter。英 ['laɪtə(r)]，美 ['laɪtər]n. 打火机，点火器；点火者，点灯者；驳船 v. 用驳船运，驳运 adj. light的形容词/副词比较级 过去式：lightered，过去分词：lightered，现在分词：lightering，形容词：light 短语：1、lighter body轻质基础油 ...
ZIPPO 我的打火机上的英文的BRADFORO.PA MADE IN U S A
答：BRADFORO.PA是美国一县地名,就是ZIPPO公司所在地.MADE IN U S A 是美国制造.应该是真的.
都彭打火机下面的英文 made in franec laque de chine 4fk07j28是...
答：法国制造
打火机用英文怎么说?
答：打火机用英文为lighter 读法：英 [ˈlaɪtə(r)] 美 [ˈlaɪtər]lighter释义 1、n. 打火机；驳船；点火者 2、v. 驳运 3、adj. 更明亮的，更光明的；照明更好的，光线更充足的 例句 Some of them burn themselves with a lighter.有些女孩会用打火机烧...
zippo打火机20029为爱写诗的英文什么意思?
答：Zippo 20029是一款特定的Zippo打火机型号，上面的刻字“为爱写诗”是中文翻译过来的，对应的英文翻译是“Write poetry for love”，意思是表达出对爱情的热爱和创造力的追求。这是一种浪漫和富有情感的表达方式，同时也是Zippo打火机个性化定制服务的一部分。
打火机英文怎么说?
答：中文：打火机 英文：Lighter 例句：打火机是现实生活中不可或缺的小工具。英文翻译：The lighter is an indispensable tool in the real life.
G ZIPPO 10 BRADFORD.PA MADE IN USA 我的火机底部是这个 是什么型号的...
答：D代表的是4月月份，按A=1B=2以此类推05是年份，2005年4月出厂的机器。打火机底部标记是识别码，以便能够确定每支打火机的生产日期。底部数字随实际生产年份改变。字母代表打火机制造的月份。例如， A - 一月，B。二月，C - 三月，等，以此类推。而数字代表的则是生产年份，例如10，代表2010年生产...
帮忙有英文解释commission和discount!!
答：您四月二十日关于询问折扣问题的来函收悉。一般来说,对于小批量订货我们不给折扣。但考虑到您此次订货量够大,我们愿给百分之六的折扣,但以后不是以此为例。你方可能了解到,我们的打火机价廉物美,所以向我们大量订购是合算的。欢迎您再来北京,我们将设法让您在这里过得愉快。我们盼望早日和您签订合同,顺此致意。
打火机英文怎么说
答：打火机的英文单词是lighter，其读音为英 [ˈlaɪtə(r)] 美 [ˈlaɪtɚ] 。lighter 英 [ˈlaɪtə(r)] 美 [ˈlaɪtɚ]n.打火机;点火器;点火者;驳船 adj.较轻的( light的比较级);较淡的 vt.用驳船运 记忆...
打火机的英文就是"Lighter"
Lighter的意思
n. 打火机；驳船；点火者
vt. 驳运
n. (Lighter)人名；(罗)利格特尔
adj. 明亮的；光明的；照明好的；光线充足的
防风打火机 wind-proof lighter...
气体打火机 gas lighter...
汽油打火机 gasoline lighter...
cigarette lighter 点烟器 ; 打火机 ; 香烟打火机 ; 点火枪
Cigar Lighter [电] 点烟器 ; 火星塞 ; 供应车用空气净化器 ; 雪茄打火机
Lighter Factory 打火机厂 ; 挨水机厂
lighter punishment 从轻处罚
lighter fluid 火机油 ; 打火机液 ; 打火机油 ; 打火机液体
gas lighter 气体打火机 ; 煤气引燃器 ; 打炎机
in lighter 装驳船 ; 装驳船驳船内交货 ; 驳船内交货
lighter excitaion 光激发
torch lighter 火炬点火器 ; 打火机 ; 点燃圣火者 ; 直冲打火机
打火机
lighter 英[ˈlaɪtə(r)] 美[ˈlaɪtɚ]
n. 打火机; 点火器; 点火者; 驳船;
adj. 较轻的( light的比较级); 较淡的;
vt. 用驳船运;
[例句]A problem for manufacturers is that lighter cars tend to be noisy
制造商们遇到的一个问题是，重量较轻的汽车往往噪音大。
[SALES CONTRACT NAME] [销售合同名称]
- by and between - 由
[BUYER NAME] （买方名称）
BUYER 买方
- and - - 与 -
[SELLER NAME] （卖方名称）
SELLER 卖方
签订
TABLE OF CONTENTS 目录
PRELIMINARY STATEMENT 1
1. DEFINITIONS AND INTERPRETATION 1 1. 定义和解释 1
2. SCOPE OF CONTRACT 1 2. 合同范围 1
3. CONTRACT PRICE 2 3. 合同总价 1
4. PAYMENT 2 4. 支付 2
5. DELIVERY 4 5. 交货 3
6. PACKING AND SHIPPING MARKS 5 6. 包装和唛头 4
7. INSPECTION AND CLAIM 6 7. 检验和索赔 5
8. INSTALLATION, COMMISSIONING AND ACCEPTANCE OF THE EQUIPMENT 7 8. 设备安装、调试和验收 6
9. WARRANTY 9 9. 保证 7
10. SOFTWARE LICENSE 10 10. 软件许可 8
11. INTELLECTUAL PROPERTY INDEMNITY 12 11. 知识产权赔偿 9
12. TAXES 13 12. 税收 10
13. REPRESENTATIONS AND WARRANTIES 13 13. 陈述及保证 10
14. TERM 14 14. 合同期限 11
15. TERMINATION 14 15. 合同终止 11
16. CONFIDENTIALITY 15 16. 保密义务 12
17. BREACH OF CONTRACT 16 17. 违约 12
18. FORCE MAJEURE 16 18. 不可抗力 13
19. SETTLEMENT OF DISPUTES 17 19. 争议的解决 13
20. MISCELLANEOUS PROVISIONS 20 20. 其他规定 16
SCHEDULE A – DEFINITIONS AND INTERPRETATION 25 附录一 - 定义和解释 19
SCHEDULE B - SPECIAL TERMS 29 附录二 - 特别条款 22
ANNEX 1 - EQUIPMENT, SERVICES & DOCUMENTATION LIST AND PRICES 31 附件一 合同设备、合同服务及相关文件清单与价格 24
ANNEX 2 - SPECIFICATIONS 32 附件二 合同技术规范 25
ANNEX 3 - PROJECT SCHEDULE 33 附件三 项目进度表 26
ANNEX 4 - ENGINEERING NOTES AND INSTALLATION RESPONSIBILITIES 34 附件四 工程说明及安装责任范围 27
ANNEX 5 - EQUIPMENT ACCEPTANCE TEST PLAN 35 附件五 设备验收测试方案 28
ANNEX 6 - SPECIMEN OF ACCEPTANCE CERTIFICATE 36 附件六 验收合格证书样本 29
CAVEATS AND DRAFTING NOTES 37 注意事项与说明 30
THIS CONTRACT ("Contract") is made in [the Contract Location] and, China on the Contract Date set out in Schedule B (Special Terms) by and between the Buyer and Seller specified in Schedule B (Special Terms). Buyer and Seller shall hereinafter be referred to individually as a "Party" and collectively as the "Parties". 本合同（“本合同”）于附录二（特别条款）中所列的合同生效日由附录二（特别条款）中所列的买方和卖方在中国[缔约地点]签订。买方和卖方以下单独称为“一方”，合称为“双方”。
PRELIMINARY STATEMENT 前言
After friendly consultations conducted in accordance with the principles of equality and mutual benefit, the Parties have agreed to enter into a sales contract in accordance with Applicable Laws and the provisions of this Contract. 双方本着平等互利的原则，经友好协商，依照有关法律，同意按照本合同的条款，订立销售合同。
Now the Parties Hereby Agree as Follows: 双方现协议如下：
1. DEFINITIONS AND INTERPRETATION 1. 定义和解释
Unless the terms or context of this Contract otherwise provide, this Contract shall be interpreted in accordance with Schedule A, and each of the terms used herein shall have the meaning ascribed to it in Schedule A (Definitions and Interpretation) or Schedule B (Special Terms) as the case may be. 除本合同条款或上下文另有所指，本合同应根据附录一进行解释，本合同中所有相关用语的定义见附录一（定义和解释）和附录二（特别条款），以适用者为准。
2. SCOPE OF CONTRACT 2. 合同范围
2.1 Supply of Equipment and Services 2.1 供应合同设备及提供合同服务
Seller shall supply to Buyer the Equipment and Services (as more specifically set out in Annex 1 hereto) [for the Project] in accordance with the terms of this Contract. Buyer shall pay Seller the Contract Price set out in Schedule B (Special Terms) hereto and shall perform its other responsibilities in accordance with the terms of this Contract. 卖方须按照本合同的条款，[就合同项目]向买方供应合同设备和提供合同服务（详见本合同附件一）。买方须按照本合同的条款，向卖方支付附录二（特别条款）所列的合同总价，同时履行本合同中规定的其它义务。
2.2 Project Supervisors 2.2 项目负责人
Seller and Buyer shall each nominate a representative as its project supervisor for the Project (each, a “Project Supervisor” and jointly, the “Project Supervisors”). Each Project Supervisor shall be authorized to deal with all technical matters in connection with the Equipment and the Services during the period from the Effective Date up to the expiration of the applicable Warranty Periods. Detailed arrangements for both regularly scheduled and emergency communications between the Project Supervisors shall be made through friendly consultation by Seller and Buyer. The Project Supervisors shall fully cooperate to resolve all technical issues which may arise in respect of the Equipment and the Services. If there is any dispute between the Project Supervisors, they shall analyze the problem, clarify the responsibilities and, to the fullest extent possible, settle it at the Installation Sites through friendly consultation. During the period of Installation and Commissioning, the progress of work, the main work done every week, all problems arising and the suggested solution(s) shall be reported weekly by the Project Supervisors to Seller and Buyer. 卖方及买方应分别指派一位代表作为合同项目的项目负责人(“项目负责人”)，并授权各自的项目负责人于合同生效日期到相关保修期届满这一段时期内，处理合同设备及合同服务相关部份的所有技术事宜。卖方及买方应通过友好协商就项目负责人之间的定期联络以及在紧急情况下的联络作出具体安排。项目负责人应通力合作以解决合同设备和合同服务可能发生的所有技术问题。如果彼此之间发生争议，项目负责人应分析有关问题，分清责任，通过友好协商，尽最大可能在安装现场解决有关问题。在安装及调试期间，项目负责人每周应向卖方及买方报告工作进度、每周所完成的主要工作、所有出现的问题及建议的解决方案。
2.3 No Transfer of Equipment 2.3 禁止转让合同设备
Buyer acknowledges and agrees that the Equipment constitutes and embodies the Confidential Information and Intellectual Property of Seller. Without the prior written consent of Seller, Buyer may not directly or indirectly transfer the Equipment to any third party for consideration or without consideration. 买方确认并同意合同设备构成并载有卖方的保密资料及知识产权。未经卖方书面同意，买方不得直接或间接地、有偿或无偿地、将合同设备转让给第三方。
3. CONTRACT PRICE 3. 合同总价
3.1 Price 3.1 合同总价
The Contract Price is set out in Schedule B (Special Terms). 合同总价详见附录二(特别条款)。
3.2 Consideration for Price 3.2 合同总价包括的事项
This Contract Price covers: 合同总价包含：
(a) the Equipment (including Hardware and Software License) and Services, (a) 合同设备(包括设备硬件和软件使用权)和合同服务，
(b) if Seller is the Party Responsible for Shipment, the cost of shipment of the Hardware and Documentation to the Place of Delivery. (b) 如果卖方是负责运输方，运送设备硬件和相关文件到交货地点的费用。
3.3 Costs and Expenses 3.3 费用和开销
The Contract Price does not cover costs and expenses that are for Buyer’s account under this Contract, or any taxes (including but not limited to customs duty and value added tax) payable by Buyer in respect of this Contract. 合同总价不含根据本合同应由买方承担的费用和开销，或买方就本合同应支付的税款(包括但不限于关税及增值税)。
4. PAYMENT 4. 支付
Buyer shall pay Seller the Contract Price on the following terms: 买方应按以下条款向卖方支付合同总价。
4.1 Advance Payment 4.1 预付款
The Advance Payment shall be paid by Buyer to Seller by wire transfer to Seller’s Designated Bank Account within ten (10) days after Buyer has received the following documents provided by Seller: 合同设备预付款由买方在从卖方收到下述文件后十（10）日内，以电汇的方式将预付款汇至卖方指定的银行帐户：
(a) Pro forma invoice covering one hundred percent (100%) of the Contract Price in six copies; (a) 载明百分之百(100％)合同总价金额的形式发票，一式六（6）份；
(b) Commercial invoice covering the Advance Payment in six copies; and (b) 载明预付款金额的商业发票，一式六（6）份；
(c) Sight draft covering the Advance Payment in two copies. (c) 载明预付款金额的即期汇票，一式两（2）份。
4.2 Delivery Payment 4.2 交货付款
The Delivery Payment shall be paid by Buyer to Seller under an irrevocable letter of credit (“Letter of Credit”). 买方应向卖方开具一份不可撤销的信用证（“信用证”），金额为交货付款额。
Buyer shall fifteen (15) days prior to the scheduled Delivery Date for first Shipment, open the Letter of Credit in favor of Seller for the Delivery Payment with a bank and in form and content acceptable to both parties. The Letter of Credit shall be available against Seller's draft(s) at sight drawn on the opening bank for the Relevant Percentage of the invoice price of each Shipment accompanied by the shipping documents as follows: 买方应于第一批合同设备装运日期前至少十五（15）天，开具一份信用证（信用证），收款人为卖方，金额为交货付款额，信用证的形式、内容、以及开证银行事先应经双方一致同意。每批合同设备交货后，卖方可凭以下单据通过即期汇票（一式两份）向开证行议付每一批合同设备发票金额的相关百分比：
(a) One original and two copies of [Airway Bill] [or other document of title] to be marked “Freight [Collect] [Prepaid]”, indicating shipping mark and consigned to Buyer. (a) 以买方为收货人的[空运单][其他运输单据]，标明“运费〖到付〗〖已付〗”，并注明唛头，一(1)份原件，两(2)份复印件；
(b) Commercial Invoice covering the Relevant Percentage in three (3) originals and three (3) copies, indicating the Contract number, L/C number and shipping mark; (b) 金额为相关百分比的商业发票，注明合同号、信用证号及唛头；三(3)份原件，三(3)份复印件，
(c) Packing list in three (3) originals and three (3) copies issued by Seller; (c) 卖方出具的装箱单，三(3)份原件，三(3)份复印件；
(d) One (1) original and one (1) copy of a Certificate of Quality issued by Seller; (d) 卖方出具的质量合格证书，一(1)份原件，一(1)份复印件；
(e) One (1) copy of fax/email to Buyer advising particulars of delivery immediately after delivery to the carrier at the Port of Delivery has been made; (e) 在装运港将货物交给承运人后以传真或电子邮件的方式通知买方有关该批货物装运细节的一份通知复印件；
(f) One (1) original and one (1) copy of certificate of origin; (f) 该批货物原产地证书，一(1)份原件，一(1)份复印件；
(g) Two (2) copies of export licenses issued by the relevant export authority or two (2) copies of the confirmation from Seller that no export license is required. (g) 有关部门颁发的出口许可证的复印件或卖方签发的表明该批货物无需出口许可证的声明，一式两(2)份。
(h) If Seller is the Party Responsible for Shipment, one (1) copy of insurance certificate specifying the risk type as all risk covering one hundred and ten percent (110%) of the invoice amount for such Shipment. (h) 如果卖方为负责运输方，一(1)份该批货物的保险证明，载明险别为一切险，投保金额为该批货物发票金额的百分之一百一十(110%)。
The Letter of Credit shall be valid until the twenty-first (21st) day after the date of last scheduled Shipment. 信用证应在预定的最后一批货物的交货日后的二十一(21)日内保持有效。
4.3 Payment on Acceptance 4.3 验收合格之后的付款
The Acceptance Payment for the Equipment shall be paid by Buyer by T/T within fifteen (15) days after Buyer has received the following documents from Seller: 合同项目的验收合格之后的付款，由买方在收到卖方提交的下述文件之后十五（15）日内以电汇的方式支付：
(a) Commercial invoice covering the Acceptance Payment in three (3) originals and three (3) copies; (a) 载明验收合格之后付款金额的商业发票，三(3)份原件和三(3)份复印件；
(b) One (1) original and one (1) copy of the Acceptance Certificate in respect of the Project. (b) 合同项目的验收合格证书，一(1)份原件和一(1)份复印件。
4.4 Shipment by Seller 4.4 卖方运输
Seller shall commence Shipment once Buyer has paid the Advance Payment and opened the Letter of Credit as prescribed in Articles 4.1 and 4.2. 买方按照第4.1 条及第4.2 条的规定支付预付款并开出信用证后，卖方应开始发运合同设备。
4.5 Bank Charges 4.5 银行费用
Each party shall be responsible for its own bank charges. 各方应负责各自的银行费用。
4.6 Title to Hardware 4.6 硬件所有权
Full title to all Hardware shall transfer from Seller to Buyer upon Buyer’s payment in full of the Contract Price. 设备硬件部分的全部所有权于卖方全额收到合同总价之时，转移给买方。
4.7 Late Payments 4.7 付款延期
If Buyer fails to make any payment within the time stipulated in this Article 4, then Buyer shall be liable to pay to Seller interest on such unpaid amounts from the due date through the date such delayed payment is made in full. The applicable rate of interest shall be the LIBOR rate for six-month U.S. dollar loans plus 2%. 如果买方未能在第4 条规定的时间内支付某一笔款项，应就欠款向卖方支付利息，利息从到期应付之日至所欠款项全额还清之日计算。适用的利率为六个月期LIBOR 美元贷款的利率加2%。
5. DELIVERY 5. 交货
5.1 Delivery Schedule 5.1 交货进度表
Seller shall deliver each Shipment to the applicable Place of Delivery on or before the applicable Delivery Date set forth in the Project Schedule. The number of Shipments shall not exceed the Maximum No. of Shipments set forth in Schedule B (Special Terms). If the Place of Delivery is different from the Installation Site, then Buyer shall be responsible for transportation and insurance of each shipment from the Place of Delivery to Installation Site. 卖方应在项目进度表中规定的有关交货日或之前交每一批货。分批交货的总批数不得超过附录二(特别条款)中规定的合同设备最多发货批数。如交货地点不是设备安装地，买方应承担将每批货物从交货地点运送至设备安装地的运输和保险费用。
5.2 Notification before Shipment 5.2 装运前通知
At least two (2) weeks before making each Shipment, Seller shall send Buyer written notice of all relevant shipping details, including description, quantity and approximate weight and size of the Equipment in each Shipment, and other information consistent with industry practice. 在装运每一批合同设备至少两 (2)周前，卖方应书面向买方通知该批合同设备装运的所有相关细节，包括设备说明、数量、大概重量及体积、以及其他按照行业惯例应该提交的资料。
5.3 Equipment Delivery 5.3 合同设备交付
All the Equipment shall be shipped in complete sets, except as otherwise agreed, i.e., any special tools for installation, materials and easily worn-out parts shall be dispatched along with the relevant Equipment. 除非另有协议，所有的合同设备均应整套装运，即，所有专用安装工具、辅料及易耗备件应与相关的合同设备一起装运。
5.4 Notification After Shipment 5.4 装运后通知
Seller shall notify Buyer by fax or email of all shipping details within two (2) working days after each Shipment has been dispatched. For each large item, if any, over two (2) metric tons, the gross weight, measurement (L x W x H), name and price of such item shall be separately indicated. 卖方应在每批合同设备装运后的两(2)个工作日内，以传真或电子邮件的方式通知买方有关该批设备装运的细节。对超过2 公吨重的大件货物(如果有的话)要分别载明每一件货物的毛重、尺寸(长×宽×高)、名称及价格。
5.5 Customs Clearance Documents 5.5 货物清关文件
Within a reasonable time after each Shipment has been dispatched, Seller shall mail the Customs Clearance Documents specified in Schedule B (Special Terms). 卖方应在每批合同设备装运后的合理时间内，向买方寄出附录二(特别条款)中列出的货物清关文件。
5.6 Insurance 5.6 保险
The Party Responsible for Shipment shall be responsible for obtaining insurance during shipment for the Equipment and Documentation in accordance with industry practice at its sole cost. If damage to the Equipment occurs during shipment, Seller and Buyer shall work together to submit an insurance claim. 负责安排运输的一方应依照行业惯例，自费为在运输途中的合同设备及相关文件购买保险。如果在运输过程中合同设备受损，卖方和买方应相互协作提出保险索陪。
5.7 Seller's Late Delivery 5.7 买方交货迟延
If solely due to Seller’s fault, Seller fails to complete delivery of all Shipments to the Place of Delivery on or before the Delivery Date for the final Shipment set forth in the Project Schedule, then Seller shall be liable to pay to Buyer liquidated damages in respect of such delivery delay at the Late Delivery Penalty Rate until such delayed Equipment is delivered in accordance with the terms of this Contract or the end of the Maximum Late Delivery Period, whichever occurs earlier. The total liquidated damages for late delivery shall not exceed the Maximum Late Delivery Penalty. The payment of liquidated damages for late delivery of any Shipment shall not release Seller from its responsibility to complete delivery of such Shipment. 如果完全由于卖方的过错，卖方未能在项目进度表规定的最后一批设备的交货日当日或之前将所有合同设备交至交货地点，卖方有责任就交货延误的合同设备按交货延误违约金比率向买方支付交货延误违约金，直到卖方按照本合同的条款交付所延误的合同设备，或直到交货延误的最长期限届满(以两者中较短者为准)。交货延误违约金的总额不超过特别条款中规定的交货延误违约金最高限额。卖方因交货延误而支付交货延误违约金并不解除其交货义务。
5.8 Buyer's Termination Right 5.8 买方终止权
If such delivery delay extends beyond the expiration of the Maximum Late Delivery Period, then Buyer shall have the right to terminate this Contract. If Buyer terminates this Contract in part or in whole, it shall return at Seller's expense all cancelled Equipment received from Seller, and Seller shall thereafter refund to Buyer, within fifteen (15) days of the date of return of all such Equipment, all amounts paid by Buyer to Seller for the terminated Equipment. 如果交货延误时间超出了最多迟延交货天数，则买方有权终止本合同。如果买方部分或全部终止本合同，买方应将从卖方收到的合同终止部分所涉及的合同设备归还卖方，费用由卖方承担。随后卖方应在这些合同设备全部返还之日后的十五(15)日内，向买方退还其就合同终止部分所涉及的合同设备向卖方支付的全部货款。
5.9 Buyer's Claims 5.9 买方索赔
All of Buyer’s claims in respect of late delivery of Equipment shall be handled solely and exclusively in accordance with the provisions of Articles 5.7 and 5.8 above. 所有买方就交货延误提出的索赔应完全按照上述第5.7 和5.8 条的规定处理，且排除其他救济措施。
6. PACKING AND SHIPPING MARKS 6. 包装和唛头
6.1 Equipment Packing 6.1 合同设备包装
All of the Equipment to be delivered by Seller shall be packed in a manner suitable to protect it against repeated handlings and numerous loadings and unloadings. Protective measures consistent with the characteristics and requirements of the various items of Equipment shall be taken to prevent the Equipment from damage by moisture, rain, shock and corrosion. 卖方对所交付的一切合同设备都应以适当方式包装，使之不因多次操作和装卸而受损。应根据合同设备不同部件的特点和要求采取保护措施，以免因潮湿、雨水、震动和腐蚀而造成损害。
6.2 Labelling of Accessories 6.2 附件标签
Each of the accessories in a package or bundle shall be labelled by Seller to indicate contract number, package number, name of the Equipment to which it is an accessory, name of accessories and their position numbers on assembly drawings. Spare parts and tools shall be marked with the words “Parts” or “Tools” besides the above particulars. 卖方应给包装箱或捆束中的每个附件加上标签，注明合同号、包装箱号、附件所属的主体合同设备的名称、附件的名称及其在安装图上的位置号码。除上述各项外，备件和工具上还应标明“备件”或“工具”字样。
6.3 Specific Markings 6.3 具体标记
Seller shall mark the following on the four adjacent sides of each package of the goods with indelible paint in conspicuous printed English words: 卖方应在货物的每个包装箱的相邻四面用不褪色的颜料以显著的印刷体英文标明下列各项：
(1) Contract Number (1) 合同号:
(2) Shipping Mark (2) 唛头:
(3) Consignee (3) 收货人:
(4) Place of Destination (4) 目的地:
(5) Name of Equipment (5) 合同设备名称:
(6) Case Number (6) 箱号:
(7) Gross Weight (Kg) (7) 毛重(公斤):
(8) Measurement (L x W x H in cm) (8) 尺寸(长×宽×高，以厘米为单位):
(9) Sites Code Number（if applicable） (9) 场地编号（如适用）:
Should any goods weigh two (2) or more than two (2) metric tons, the center of gravity and hoisting position shall be marked in English and with the appropriate markings on two sides of each case so as to facilitate loading and handling. In addition, in accordance with the characteristics and different requirements of the goods for loading
举个例
Purchasing Order
PO#:1234
Buyer name:
Vendor name:
Item name: Lighter
Color: White
Order quantity: 10,000 piece
Delivery: 2009/07/01
Ship from: Xiamen
Ship to: Hongkong
Fob: RMB$2.00 not include VAT
Fob point: Xiamen
Total amount: RMB$20,000
Payment team: L/C
30% of total amount must be paid before starting to product. 70% of total amount must be paid before shipping
Packing information:
1 piece packed in one small box
box dimenssion: 30mm*15mm*8mm
答：二零零零年五月二十曰来函收到，不胜感激。得知贵公司认为火焰牌打火机价格过高，无利可图，本公司极感遗憾。来函又提及曰本同类货品报价较其低近百分之十。本公司认同来函的说法，然而，其他厂商的产品质量绝对不能与本公司的相提并论。虽然极望与贵公司交易，但该还盘较本公司报价相差极大，故未能...
答：打火机的英语是lighter。英 ['laɪtə(r)]，美 ['laɪtər]n. 打火机，点火器；点火者，点灯者；驳船 v. 用驳船运，驳运 adj. light的形容词/副词比较级 过去式：lightered，过去分词：lightered，现在分词：lightering，形容词：light 短语：1、lighter body轻质基础油 ...
答：BRADFORO.PA是美国一县地名,就是ZIPPO公司所在地.MADE IN U S A 是美国制造.应该是真的.
答：法国制造
答：打火机用英文为lighter 读法：英 [ˈlaɪtə(r)] 美 [ˈlaɪtər]lighter释义 1、n. 打火机；驳船；点火者 2、v. 驳运 3、adj. 更明亮的，更光明的；照明更好的，光线更充足的 例句 Some of them burn themselves with a lighter.有些女孩会用打火机烧...
答：Zippo 20029是一款特定的Zippo打火机型号，上面的刻字“为爱写诗”是中文翻译过来的，对应的英文翻译是“Write poetry for love”，意思是表达出对爱情的热爱和创造力的追求。这是一种浪漫和富有情感的表达方式，同时也是Zippo打火机个性化定制服务的一部分。
答：中文：打火机 英文：Lighter 例句：打火机是现实生活中不可或缺的小工具。英文翻译：The lighter is an indispensable tool in the real life.
答：D代表的是4月月份，按A=1B=2以此类推05是年份，2005年4月出厂的机器。打火机底部标记是识别码，以便能够确定每支打火机的生产日期。底部数字随实际生产年份改变。字母代表打火机制造的月份。例如， A - 一月，B。二月，C - 三月，等，以此类推。而数字代表的则是生产年份，例如10，代表2010年生产...
答：您四月二十日关于询问折扣问题的来函收悉。一般来说,对于小批量订货我们不给折扣。但考虑到您此次订货量够大,我们愿给百分之六的折扣,但以后不是以此为例。你方可能了解到,我们的打火机价廉物美,所以向我们大量订购是合算的。欢迎您再来北京,我们将设法让您在这里过得愉快。我们盼望早日和您签订合同,顺此致意。
答：打火机的英文单词是lighter，其读音为英 [ˈlaɪtə(r)] 美 [ˈlaɪtɚ] 。lighter 英 [ˈlaɪtə(r)] 美 [ˈlaɪtɚ]n.打火机;点火器;点火者;驳船 adj.较轻的( light的比较级);较淡的 vt.用驳船运 记忆...
